Acer PD 126D

Introduction

PD 126D projectors are made for the people who need it for quick application. The projector does not take too much time in starting up nor does it take a lot of time while shutting down. It has also got password control capability. All these features make it worth buy.

meaningful Features

With the dimensions of 256 mm x 198 mm x 92 mm and the weight of 2.3 kg its quite similar to PD 117D. One of the rare features of PD 126D is that it has an alarm which sounds when the projector is switched on or off, it alarms when the time is up for the eTimer function or if there is some error in the function of the projector. eTimer is a characterize which allows you to fix a time of your presentation. With this characterize you will get an idea by what time your presentation will end. except this, there is a digital clock appears on the screen to keep you reminding about the time.

PD 126D comes with the option of quick start and quick shutdown. The projector starts working within 15 seconds of switching it on and similarly it shutdowns within 30 seconds. The security characterize of the projector decreases the chances of it being stolen. It also prevents it from unauthorized usage as it has the password control capability.

PD 126D also has an Empower meaningful which is a quick button on far away control or projector control panel. This is a special characterize that will be found only with Acer Projectors. With the help of this Empower meaningful it is easy for the user to perform the Acer eView Management. eView Management is a characterize where in the user can select the optimal characterize mode for specific characterize content. eOpening Management in PD 126D is a characterize which allows you to customize a desired project start up screen. The auto shutdown characterize allows the projector to turn off automatically with the help of OSD if the projector is continuously on no signal input.

Compatibility

PD 126D is compatible with is compatible with IBM computers and the affiliated ones. Besides this, you could also use it with Apple Macintosh, iMac, etc. For video compatibility, you need to have one of these systems: NTSC, PAL, SECAM, HDTV, EDTV and SDTV.

Focus

PD 126D has a focus lens of F/ 2.5-2.7 with manual speed and manual focus. Its efficiency is enhanced with its operating system, DLP. The projector can be used within a distance of 0.7m to 8.4m.The PD 126D comes with 1024 x 768 XGA resolution. When you open the kit of the projector you will find a 15 pin D-Sub VGA cable, a Composite Video Cable, AC strength Cord, S-Video Cable, USB Cable, far away Control with Page Up and Page Down function, a CD for User’s Guide, Quick Start Card, Lens Cap and Carrying Case. For AV input there are 2 HDB 15-Pin D-Sub, one Composite Video RCA Jack, one S-Video Mini DIN, one 3.5mm Audio Mini Jack and 29-pin DVI-I Connector. For output there is one 15-Pin D-Sub for Monitor Loop by and one USB Connector for far away Computer Control.

The image brightness of PD 126D is 2400 ANSI lumens, it reduces up to 1920 ANSI lumens. The contrast ratio of PD 126P is 2000:1 with the uniformity of 90%. The native resolution of the projector is 1024 x 768 pixels. The projector supports 16.7 million colors. The projection screen size diagonally is 27.5″ x 300″. There are a lot of options for projection mode. You can use this projector for Front, Rear, Front-Ceiling and Rear-Ceiling projection. Many projectors do not have the rear option. The bulb life of PD 126D is 3000 hours on an economic mode and 2000 hours when used properly. It also has 1 USB Connector for far away Computer Control.

Conclusion

PD 126D has no problems with connectivity. It has all the features and accessories that you will need in Projectors.

Leave a Reply